Fully Jacket Ball Valve,2205,PN16,DN80,RF End
1. Proiectare și fabricație: DIN 3357
2. Față în față: DIN 3202
3. Capăt cu flanșă: DIN2501
4. Dimensiune nominală: DN15 – DN200
5. Presiune nominală: PN16, PN25;
Interval de dimensiuni: de la 2” la 48”
Interval de presiune: Clasa 150 până la 2500
Conexiuni la capăt: RF cu flanșă, RTJ, sudare cap la cap
Tip bilă: bilă solidă forjată, montată pe trunion
Dimensiuni de capăt cu flanșă: ASME B16.5 (≤24”), ASME B16.47 Seria A sau B (>24”)
Dimensiuni capăt de sudare cap la cap: ASME B16.25 față în față
Dimensiuni față în față: ASME B16.10
Inspecție și testare: API 6D
Materiale caroserie: ZTA1, ZTA2, ZTA3, ZTA9, ZTA10, ZTC4 TA1, TA2, TA3, TA9, TA10, TC4 Titanium Gr2, Gr3, Gr5, Gr6, Gr7, Gr12 Titanium GrC2, GrC3, GrC5, GrC6, Ti-PrF2B, Ti-PrD2 Gr3F, GrF5, GrF6, GrF7, GrF12
Materiale scaun: PTFE, RPTFE, DEVLON, NYLON, PEEK, metal complet cu fața dură.
Caracteristicile produsului
.Rezistența la curgere este mică;
2. Scaun piston, design de structură anti-incendiu de protecție;
3. Fără limitare a direcției de curgere a mediului;
4. Când supapa este în poziție complet deschisă, suprafețele scaunului sunt în afara fluxului de curgere care întotdeauna în contact complet cu poarta care poate proteja suprafețele scaunului și potrivite pentru conducta de porc;
5.Poate fi alese ambalajele cu primăvară;
6. Ambalarea cu emisii scăzute poate fi aleasă în conformitate cu cerințele ISO 15848;
7. Se poate alege un design extins cu tijă;
8.Se poate alege designul scaunului din metal pe metal;
9.DBB，DIB-1，Designul DIB-2 poate fi ales；
10.Mingea se fixează cu o placă de sprijin și un arbore fix;
Descrierea supapei:
Tip supapă: Supapă cu bilă plutitoare
Materialul corpului: 2205.
Diametru nominal: DN80
Presiune nominală: PN16
Conexiune finală: Flanșă RF
Temperatura de funcționare: -29℃~+200℃.
Funcționare: Pârghie.
The 2205 insulated ball valve is welded with a metal jacket on the basis of the ball valve, which is used to inject steam or other heat-insulating and cold-insulating media to ensure that the medium in the valve can work normally. The insulated jacket ball valve has good heat-insulating and cold-insulating properties, and the valve diameter is consistent with the pipe diameter, while effectively reducing the heat loss of the medium in the pipeline.
The 2205 insulated ball valve has several structural forms such as integral insulated ball valve, two-piece insulated ball valve, and sandwich insulated ball valve according to the different structures of the ball valve. It is widely used in system pipelines in chemical, petroleum, pharmaceutical, metallurgical and other industries.
2205 insulated ball valve application range:
Insulated jacket ball valves are mainly used in various systems such as petroleum, chemical, metallurgical, pharmaceutical, and food to transport heavy oil, rubber and other high-viscosity media that will solidify at room temperature.
2205 insulation ball valve structural features:
The insulation jacket ball valve adopts an integral jacket structure design, which can more evenly insulate heat and cold. The insulation ball valve is smaller in size and lighter in weight than ordinary ball valves, and has no leakage and good sealing performance. The jacket is welded with carbon steel pipe, which is more pressure-resistant and firm than casting. The jacket, the outer side of the valve body and the jacket pipe are welded, and the maximum pressure of steam or cold water is allowed to be 1MPa.
2205 insulation ball valve has good insulation and cold-keeping properties. Except for the reduced diameter insulation ball valve, the valve diameter and pipe diameter are the same, the medium flows in a straight line, the resistance is small, and the heat loss of the medium in the pipeline can be effectively reduced. Therefore, it has excellent performance for liquid media that are easy to solidify and have high viscosity.
2205 Insulated Ball Valve Standard Specifications:
Design and manufacturing standards: GB/T12224, ASME B 16.34
Structural length standards: GB/T 12221-2005, ASME B 16.10
Connection flange standards: JB/T 79, GB/T 9113, ASME B 16.5
Pressure and temperature grades: GB/T 12224-2005
Test and inspection standards: GB/T 13927-2008, JB/T9092, API 598
Fully jacketed jacket ball valve specification
| Product Name | Fully jacketed jacket ball valve |
| 1. Material | WCB,CF8,CF3,CF8M,CF3M etc. |
| 2. Size | 1/2~24 inch ( DN15~DN600) |
| 3. Structure | Full jacket or partial jacket design |
| 4. Working Pressure | 150LB~600LB,PN10~PN100 |
| 5. Connection Ends | Flange |
| 6. Working Temp. | -20~450ºC, or according to customer requirements for different industry. |
| 7. Suitable Medium | Easy to solidify, high viscosity medium |
| 8. Operation | Handle operated, Locking device is option |
China 2205 Fully Jacket Ball Valve Manufacturer ,OUdian Supplies 2205 Fully Jacket Floating Ball Valve, 2205 Fully Jacket Ball Valve, DN80 2205 Fully Jacket Ball Valve , PN16 2205 Fully Jacket Ball Valve.
