Válvula de bola con camisa completa, 2205, PN16, DN80, extremo RF
1. Diseño y fabricación: DIN 3357
2. Cara a cara: DIN 3202
3. Extremo de brida: DIN2501
4. Tamaño nominal: DN15 – DN200
5. Presión máxima: PN16, PN25;
Rango de tamaños: 2” a 48”
Rango de presión: Clase 150 a 2500
Conexiones finales: RF con bridas, RTJ, soldadura a tope
Tipo de bola: bola sólida forjada, montada sobre muñón
Dimensiones del extremo bridado: ASME B16.5 (≤24”), ASME B16.47 Serie A o B (>24”)
Dimensiones del extremo de soldadura a tope: ASME B16.25 cara a cara
Dimensiones cara a cara: ASME B16.10
Inspección y Pruebas: API 6D
Materiales del cuerpo: ZTA1, ZTA2, ZTA3, ZTA9, ZTA10, ZTC4 TA1, TA2, TA3, TA9, TA10, TC4 Titanio Gr2, Gr3, Gr5, Gr6, Gr7, Gr12 Titanio GrC2, GrC3, GrC5, GrC6, Ti-Pd7B, GrC12 Titanio GrF2, Gr3F, GrF5, GrF6, GrF7, GrF12
Materiales del asiento: PTFE, RPTFE, DEVLON, NYLON, PEEK, metal completo con revestimiento duro.
Características del producto
.La resistencia al flujo es pequeña;
2.Asiento de pistón, diseño de estructura antiestática de protección contra incendios;
3.Sin limitación en la dirección del flujo del medio;
4.Cuando la válvula está en posición completamente abierta, las superficies del asiento están fuera del flujo de flujo que siempre está en pleno contacto con la compuerta que puede proteger las superficies del asiento y es adecuada para limpiar la tubería;
5.Se puede elegir un embalaje con resorte;
6. El embalaje de bajas emisiones se puede elegir de acuerdo con el requisito ISO 15848;
7.Se puede elegir el diseño extendido del vástago;
8.Se puede elegir el diseño del asiento de metal a metal;
9.Se puede elegir el diseño DBB,DIB-1,DIB-2;
10.La bola se fija con una placa de soporte y un eje fijo;
Descripción de la válvula:
Tipo de válvula: válvula de bola flotante
Material del cuerpo: 2205.
Diámetro nominal: DN80
Clasificación de presión: PN16
Conexión final: Brida RF
Temperatura de trabajo: -29℃~+200℃.
Funcionamiento: Palanca.
The 2205 insulated ball valve is welded with a metal jacket on the basis of the ball valve, which is used to inject steam or other heat-insulating and cold-insulating media to ensure that the medium in the valve can work normally. The insulated jacket ball valve has good heat-insulating and cold-insulating properties, and the valve diameter is consistent with the pipe diameter, while effectively reducing the heat loss of the medium in the pipeline.
The 2205 insulated ball valve has several structural forms such as integral insulated ball valve, two-piece insulated ball valve, and sandwich insulated ball valve according to the different structures of the ball valve. It is widely used in system pipelines in chemical, petroleum, pharmaceutical, metallurgical and other industries.
2205 insulated ball valve application range:
Insulated jacket ball valves are mainly used in various systems such as petroleum, chemical, metallurgical, pharmaceutical, and food to transport heavy oil, rubber and other high-viscosity media that will solidify at room temperature.
2205 insulation ball valve structural features:
The insulation jacket ball valve adopts an integral jacket structure design, which can more evenly insulate heat and cold. The insulation ball valve is smaller in size and lighter in weight than ordinary ball valves, and has no leakage and good sealing performance. The jacket is welded with carbon steel pipe, which is more pressure-resistant and firm than casting. The jacket, the outer side of the valve body and the jacket pipe are welded, and the maximum pressure of steam or cold water is allowed to be 1MPa.
2205 insulation ball valve has good insulation and cold-keeping properties. Except for the reduced diameter insulation ball valve, the valve diameter and pipe diameter are the same, the medium flows in a straight line, the resistance is small, and the heat loss of the medium in the pipeline can be effectively reduced. Therefore, it has excellent performance for liquid media that are easy to solidify and have high viscosity.
2205 Insulated Ball Valve Standard Specifications:
Design and manufacturing standards: GB/T12224, ASME B 16.34
Structural length standards: GB/T 12221-2005, ASME B 16.10
Connection flange standards: JB/T 79, GB/T 9113, ASME B 16.5
Pressure and temperature grades: GB/T 12224-2005
Test and inspection standards: GB/T 13927-2008, JB/T9092, API 598
Fully jacketed jacket ball valve specification
| Product Name | Fully jacketed jacket ball valve |
| 1. Material | WCB,CF8,CF3,CF8M,CF3M etc. |
| 2. Size | 1/2~24 inch ( DN15~DN600) |
| 3. Structure | Full jacket or partial jacket design |
| 4. Working Pressure | 150LB~600LB,PN10~PN100 |
| 5. Connection Ends | Flange |
| 6. Working Temp. | -20~450ºC, or according to customer requirements for different industry. |
| 7. Suitable Medium | Easy to solidify, high viscosity medium |
| 8. Operation | Handle operated, Locking device is option |
China 2205 Fully Jacket Ball Valve Manufacturer ,OUdian Supplies 2205 Fully Jacket Floating Ball Valve, 2205 Fully Jacket Ball Valve, DN80 2205 Fully Jacket Ball Valve , PN16 2205 Fully Jacket Ball Valve.
